*** All prices in Australian Dollars unless otherwise stated ***
Valued customers: Due to the fluctuating Aussie dollar and varying import duties, the prices presented below may rise or fall slightly from time to time. We apologise in advance for the former, and cheer with you in advance for the latter. Thanks for understanding!
RMA paste fluxes, air and manual dispensers
 |
GENUINE Amtech RMA-223-TPF Paste Flux, 10CC, AIR DISPENSER SYRINGE
An excellent general purpose flux perfectly suited to SMT and BGA reworking. These have been purchased from AMTECH directly and are certified genuine. Comes with two dispensing tips (metal and plastic) as well as a plunger for manual dispensing. Please see our PasteFlux article for more information
|
| RMA223-ORG |
1+ $6.45 ea |
5+ $6.15 ea |
10+ $5.75 ea |
|
| Only 2 remain | Local stock (Sydney) |
Weight: 75g |
 |
GENUINE Amtech RMA-223-TPF Paste Flux, 10CC, w/Tip & Plunger
Same as the above item, supplied with two tips (metal and plastic), as well as a plunger for manual dispensing. Please see our PasteFlux article for more information
|
| RMA223-10CC |
1+ $6.95 ea |
5+ $6.65 ea |
10+ $6.25 ea |
|
| Available stock: 4 |
Local stock (Sydney) |
Weight: 75g |
 |
FAKE Amtech knock-off Paste Flux, 10CC, AIR DISPENSER SYRINGE
Here we have a fairly decent AMTECH RMA-223-UV clone from China, supposedly "genuine" due to the hologram, which ironically isn't present on most of the tubes we've received. It has excellent wetting characteristics, but not recommended for exteremly fine-pitched SMD work unless you have PURE Isopropyl on hand to remove the (mildly conductive) residue. Please see our PasteFlux article for more information.
SELLING BELOW COST PRICE!; Available until stock exhausted
|
| F223-ORG |
1+ $2.70 ea |
5+ $2.45 ea |
10+ $2.20 ea |
|
| Available stock: 6 |
Local stock (Sydney) |
Weight: 75g |
 |
FAKE Amtech knock-off Paste Flux, 10CC, w/Tip & Plunger
Same as the above item, supplied with two tips (metal and plastic), as well as a plunger for manual dispensing. Please see our PasteFlux article for more information
SELLING BELOW COST PRICE!; Available until stock exhausted
|
| F223-10CC |
1+ $3.15 ea |
5+ $2.85 ea |
10+ $2.50 ea |
|
| Available stock: 5 |
Local stock (Sydney) |
Weight: 75g |
PCB Plating solutions
 |
Cool-Amp PCB Silver-Plating powder (four gram vial)
A fantastic Silver Plating Powder by Cool-Amp Conducto-Lube Inc with an indefinite shelf-life. We've obtained permission from Cool-Amp to distribute this in small affordable "sampler vials". Each vial contains 4 Grams (by volume) of plating powder, enough to silver-plate up to fifty square inches of copper. Firmly rub a small amount onto your PCB using a slightly dampenned paper towel for instant silver-plating!
|
| cavial-4g |
1+ $3.95 ea |
5+ $3.65 ea |
10+ $3.50 ea |
|
| Available stock: 94 |
Local stock (Sydney) |
Weight: 10g |
"Kapton" Polyimide adhesive films
 |
5mm "Kapton" Polyimide film, 33 metre roll
5mm high-temperature polyimide film, used as a temporary solder mask for repair/rework (or other applications where a high temperature adhesive is required). Silicone-based adhesive, withstands 260oC for one hour, and 400oC for short periods. See our Kapton Masking tutorial for usage information
|
| kap-5mm |
1+ $4.95 ea |
5+ $4.90 ea |
10+ $4.85 ea |
|
| Available stock: 48 |
Local stock (Sydney) |
Weight: 10g |
|
10mm "Kapton" Polyimide film, 33 metre roll
10mm high-temperature polyimide film, used as a temporary solder mask for repair/rework (or other applications where a high temperature adhesive is required). Silicone-based adhesive, withstands 260oC for one hour, and 400oC for short periods. See our Kapton Masking tutorial for usage information
|
| kap-10mm |
1+ $6.95 ea |
5+ $6.90 ea |
10+ $6.85 ea |
|
| Available stock: 30 |
Local stock (Sydney) |
Weight: 10g |
